Your dashboard’s fuel-economy display is handy. But if you want a clearer picture of what your car is actually using, start with a simple fuel log.
You don’t need a complicated spreadsheet or special equipment. A notebook, your fuel receipts, and a little consistency will do.
Whether you’re looking at driving habits, routine maintenance, or an optional product, the goal is the same: understand your normal fuel economy before deciding whether something changed.
The easy method
Start with a full tank. Stop when the pump shuts off normally, without topping off. Record the odometer reading and reset your trip meter if you use one.
That first fill establishes your starting point. Don’t include its gallons in the MPG calculation because you haven’t measured the miles driven on that fuel yet.
At each following fill-up:
Fill the tank using the same approach.
Record the odometer reading and gallons added.
Calculate the miles driven since the previous fill.
Note anything unusual about the driving.
Keep going across several fill-ups, ending with another full tank. If you make a partial fill along the way, record it too and include those gallons in the total.
Then use this calculation:
Total miles driven ÷ total gallons added = MPG
For example, 900 miles ÷ 36 gallons = 25 MPG.
Use the totals rather than simply averaging individual tank MPG figures. Tanks can cover different distances and use different amounts of fuel, so averaging those MPG numbers can distort the result.
Start a simple fuel log
This example shows how the starting fill stays outside the measured total:
| Fill-up | Odometer | Miles Since Previous Fill | Gallons Added | Driving Notes |
|---|---|---|---|---|
| Starting fill | 50,000 | – | Excluded | Full tank; starting point |
| Next fill | 50,300 | 300 | 12 | Mostly commuting |
| Following fill | 50,625 | 325 | 13 | More highway driving |
| Final fill | 50,900 | 275 | 11 | Extra traffic and idling |
| Measured total | – | 900 | 36 | 25 MPG overall |
The calculation: 900 miles ÷ 36 gallons = 25 MPG. The starting fill establishes the baseline, so its gallons are excluded. This example assumes each listed fill ends with a full tank. Record any partial fills and include those gallons before calculating the full-period result.
Why the number moves
Your car doesn’t have the same day every day.
A week of short trips and traffic can look very different from a long highway drive. Wind, temperature, speed, hills, tire pressure, cargo, towing, and idling all affect the comparison.
Write down the things you’ll forget later. “Heavy traffic all week” or “towed the trailer Saturday” can explain more than an MPG number on its own.
One unusually good tank is interesting. Several comparable tanks are much more useful.
Test one thing at a time
Take care of required maintenance first. Don’t postpone a repair or leave a tire underinflated just to preserve a baseline.
Once the car is in good condition, record several normal fill-ups before evaluating an optional change. Keep your routes and driving routine as similar as practical, and note when you make the change.
If you also change your commute, correct tire pressure, and complete overdue service, your log can show the combined result. It won’t tell you exactly how much each change contributed.
Keep expectations realistic
A personal fuel log helps you spot patterns. It doesn’t turn everyday driving into a controlled laboratory test.
If your MPG improves, look at what else changed. If it drops, check the driving conditions and maintenance history before blaming a product or assuming something is wrong.
Your result belongs to your vehicle and the conditions you recorded. Someone else’s truck or commute may tell a different story.
Your fuel-economy comparison checklist
Fill consistently and stop at the pump’s normal automatic shutoff.
Record the starting odometer reading.
Log miles and gallons at each following fill-up.
Include any partial fills in the fuel total.
Note route, traffic, weather, idling, and load.
Address required maintenance before testing optional changes.
Collect several baseline tanks for comparison.
Compare total miles divided by total gallons.
Treat a before-and-after difference as an observation, not proof of its cause.
Where Duravi fits
If you’re considering Duravi Engine Enhancer, a fuel log gives you a useful starting point for understanding your vehicle’s normal operation.
Engine Enhancer travels through the engine oil to metal contact surfaces involved in friction and wear. It has a different job from a fuel-system cleaner, and an MPG log alone won’t tell you everything about how those surfaces are performing.
Confirm the application and current directions, record when you use it, and continue tracking your normal driving. Any fuel-economy change should be considered alongside the conditions in your log.
Your next step
Start your fuel log at your next fill-up. When your routine maintenance is current, explore Duravi Engine Enhancer for your engine application and make an informed decision at your next planned oil service.