Lower vibration in a distribution-center gearbox.

Distribution-center gearbox · Duravi Grease

GearboxField observationVibration

Before-and-after comparison · treatment marked April 16

Before: nearly 1.0 in/s. After: below 0.5 in/s.

Based on the published case summary. Bars show approximate comparison thresholds, not individual readings or the original daily time series.

≈50%

lower reported vibration

Nearly 1.0 in/s → below 0.5 in/s

Reported under the documented application conditions.

Equipment, test method + conditions

Application: Distribution-center gearbox
Duravi product: Duravi Grease
Baseline / comparison: Nearly 1.0 in/s → below 0.5 in/s
Test method: Reported vibration readings over time, expressed in inches per second.
Measured result: The published field account reports an initial vibration reduction of nearly 50%, stabilizing below 0.5 in/s over time.
Observation period: Testing began April 16; subsequent readings are shown in the original chart.
Evidence type: Reported field application
Source: Duravi product line and field case studies · page 16

The challenge

The maintenance
problem.

Overheating and recurring component failures prompted treatment of a distribution-center gearbox.

The published field account reports an initial vibration reduction of nearly 50%, stabilizing below 0.5 in/s over time.

The vibration readings fell from nearly 1.0 in/s to below 0.5 in/s, giving the maintenance team a measurable before-and-after comparison.

Your application

Share your equipment, operating conditions and current product to discuss whether this treatment is suitable.